Floor bearing plate forming machine is a kind of equipment specially used for the production of floor bearing plate,which is widely used in various construction projects.Our floor decking machines have been exported to many North American countries, such as the America,Canada, Mexico. Especially for the America, we already sent many floor decking machines to there, we have customer from New York,Florida, Texas, California as so on.
Work flow of floor decking forming machine:
Decoiler-feeding material device-main roll forming machine-cutting system-products receiving table
Profile picture of 1.5b Metal Decking Panel Roll forming Machine For North America:
Raw material:Galvanized coils yield strength till 550 Mpa
Material thickness:16-22gauge( 0.8-1.5 mm)
Machine frame:400 H beam steel welded
Roller fixer:Middle plate (thickness 20mm)
Material of rollers:Gcr15 quenching treat HRC58-60
Forming stations:28 roller stations
Diameter of shafts:φ 95 mm
Material of shafts:45# steel precision-machined
Forming speed:0-15 m per minute
Voltage:480 v 60 hz 3 phase or as request
Transmission way:Gear and 2 inches double chain with chain tensors
Drive motor:Power:18.5 kw x 2 sets
installation: inside the machine
Cutting blade material:Cr12Mov quenched treatment to improve hardness
Cutting type:Hydraulic cutting
Dimension of the machine:15000 х 1850 х 1500 mm
Weight:about 15.5 t
12 tons hydraulic decoiler with loading car
Loading capacity: 12t
Max coil width: 1250mm
Coil inner diameter: 480-610mm
Hydraulic mandrel expansion
Electric motor mandrel drive
Hydraulic motor power: 5.5kw
Drive motor power: 7.5kw
Feeding device
1. Rubber rollers can reduce the friction to protect raw material surface
2. With handwheels easy adjust for feeding different thickness raw material.
3.The feeding part is mold iron frame, a handle can adjust feeding width.
4.chain links and nylon brackets to protect the steel from scratches. A partial missing in upper nylon brackets to observe the feeding position.
Roll forming device
1.rollers Gcr15 quenching treat HRC58-60 good hardness for long service time.
2. Each roller has number and with keynotes, it can fix on the shaft stablely
Transmission device
1.Gear and 2 inches double chain drive,strong and stable.
2.Chain tensors design- can guarantee the chain is not loose after long time use
Hydraulic cutting device
1.Adopt double oil cylinder more stable than single oil cylinder
2.Cutting blade material:Cr12Mov quenched treatment to improve hardness
3.Logo press device added
PLC control system
PLC brand : Delta
Inverter brand: Delta
Low electric part: Schneider
Encoder: Omron
Function:
1.Adopted aviation plugs,easy installation.
2.Full automatic easy operation,labor saving
3.Language:English(according to customers’ needs)
4.National coinsurance,spar parts Brand Siemens and Schneider.
Hydraulic station
7.5kw motor with cooling system for long time using.
Spar parts
Our machine warranty time 2 years and the below spare parts are with the machine send to you free of charge
